Yealink SIP-T2 SERIES Administrator's Manual page 191

Details of Configuration Parameters:
Parameters
cloud.enable
Description:
Enables or disables the Cloud feature for the IP phone.
0-Disabled
1-Enabled
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
Display contact photo allows the IP phone to present the contact avatar when it
receives an incoming call, dials an outgoing call or engages in a call. Display contact
photo feature is only applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP phones.
Display called party information allows the IP phone to present the callee identity in
addition to the presentation of caller identity when it receives an incoming call.
The following figure shows an example of screen display when Display Called Party
Information feature is enabled on the phone (a call from Tom (phone number: 1008) to
Marry (phone number: 1009)).
For SIP-T42G/T41P/T40P/T27P/T23P/T23G/T21(P) E2/T19(P) E2 and CP860 IP phones:
Configuring Basic Features
Permitted Values
0 or 1
Default
1
169