Yealink SIP-T2 SERIES Administrator's Manual page 422

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2. Select the desired value from the pull-down list of Allow Trans Exist Call.
3. Click Confirm to accept the change.
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call using a directed pickup key or the DPickup soft key.
This feature depends on support from a SIP server. For many SIP servers, directed call
pickup requires a directed pickup code, which can be configured on a phone or a
per-line basis.
Note
It is recommended not to configure the directed call pickup key and the DPickup soft key
simultaneously. If you do, the directed call pickup key will not be used correctly.
Procedure
Directed call pickup can be configured using the configuration files or locally.
Configuration File
400
<MAC>.cfg
Configure the directed call
pickup code on a per-line basis.
Parameter:
account.X.direct_pickup_code