Yealink SIP-T2 SERIES Administrator's Manual page 160

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
File
Local
Details of Configuration Parameters:
phone_setting.idle_clock_display.enable
Description:
Enables or disables the IP phone to display the idle clock.
0-Disabled
1-Enabled
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
Menu->Basic->Display->Idle Clock
To configure the idle clock via phone user interface:
1. Tap ->Basic->Display->Idle Clock.
2. Tap the On or Off radio box in the Idle Clock Display field.
3. Tap the Save soft key.
Bluetooth enables low-bandwidth wireless connections within a range of 10 meters (32
feet). The best performance is in the 1 to 2 meter (3 to 6 feet) range. You can
activate/deactivate the Bluetooth mode and then pair and connect the Bluetooth
headset with your phone. It is only applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP
phones. You can also activate/deactivate the Bluetooth mode and then pair and
connect the Bluetooth-Enabled mobile phone for Yealink SIP VP-T49G IP phones. For
more information, refer to the
You can personalize the Bluetooth device name for the IP phone. The pre-configured
Bluetooth device name will display in scanning list of other devices. It is helpful for the
other Bluetooth devices to identify and pair with your IP phone.
Note
To use this feature on SIP-T48G/T46G/T29G IP phones, make sure the Bluetooth USB
dongle is properly connected to the USB port on the back of the phone.
138
Phone User Interface
Parameters
Yealink_SIP_VP-T49G_User_Guide
Parameters:
phone_setting.idle_clock_display.ena
ble
Configure the idle clock.
Permitted Values
0 or 1
.
Default
1