Yealink SIP-T2 SERIES Administrator's Manual page 923

Troubleshooting
Details of the Configuration Parameter:
Parameter Permitted Values Default
packet_capture.max_file_counts Integer from 1 to 100 15
Description:
Configures the count of the number of packets to capture.
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
Settings->Configuration->Packet Capture Count
Phone User Interface:
None
packet_capture.max_file_bytes Integer from 100 to 1024 1024
Description:
Configures the number of bytes (in KB) of the packet to capture.
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
Settings->Configuration->Packet Capture Clip Bytes
Phone User Interface:
None
packet_capture.filter_type 0, 1 or 2 0
Description:
Configures the filter type of the packet to capture.
0-Custom-Customize the packet filter string.
1-SIP or H245 or H225-Capture SIP , H245 and H225 packets.
2-RTP-Capture RTP packets.
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
Settings->Configuration->Pcap Filter Type
Phone User Interface:
None
String within 255
packet_capture.filter Blank
characters
Description:
901