Yealink SIP-T2 SERIES Administrator's Manual page 999

SIP uses six request methods:
INVITE—Indicates a user is being invited to participate in a call session.
ACK—Confirms that the client has received a final response to an INVITE request.
BYE—Terminates a call and can be sent by either the caller or the callee.
CANCEL—Cancels any pending searches but does not terminate a call that has
already been accepted.
OPTIONS—Queries the capabilities of servers.
REGISTER—Registers the address listed in the To header field with a SIP server.
The following types of responses are used by SIP and generated by the IP phone or the
SIP server:
SIP 1xx—Informational Responses
SIP 2xx—Successful Responses
SIP 3xx—Redirection Responses
SIP 4xx—Client Failure Responses
SIP 5xx—Server Failure Responses
SIP 6xx—Global Failure Responses
The following figure illustrates the scenario of a successful call. In this scenario, the two
end users are User A and User B. User A and User B are located at Yealink SIP IP
phones.
The call flow scenario is as follows:
1. User A calls User B.
2. User B answers the call.
Appendix
977