Yealink SIP-T2 SERIES Administrator's Manual page 907

Details of Configuration Parameters:
Parameters
syslog.log_level
Description:
Configures the detail level of syslog information to be exported.
0-system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->System Log Level
Phone User Interface:
None
To configure the level of the system log via web user interface:
1. Click on Settings->Configuration.
oad
For SIP VP-T49G:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-config&q=l
oad
Permitted Values
Integer from 0 to 6
Troubleshooting
Default
3
885