Yealink SIP-T2 SERIES Administrator's Manual page 419

Transfer mode via dsskey enables IP phones to handle the current call differently via the
DSS key. IP phones support three transfer modes: New Call, Blind Transfer and Attended
Transfer. For more information on Blind Transfer and Attended Transfer, refer to
Transfer on page 383.
Note
It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
The transfer mode via dsskey feature is available when the DSS key is assigned to the
following features:
Speed dial

Transfer

BLF/BLF List

For more information on how to configure the DSS Key, refer to
DSS Key on page 940.
Procedure
Transfer mode via dsskey can be configured using the configuration files or locally.
Configuration File
Local
<y0000000000xx>.cfg
Web User Interface
Configuring Basic Features
Appendix D: Configuring
Configure the transfer mode via
dsskey.
Parameter:
transfer.dsskey_deal_type
Configure the transfer mode via
dsskey.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T2
9G/T27P/T23P/T23G/T21(P) E2:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet
?m=mod_data&p=features-trans
fer&q=load
Call
397