Yealink SIP-T2 SERIES Administrator's Manual page 896

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Web User Interface:
Network->Advanced->802.1x->MD5 Password
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->802.1x Settings->MD5 Password
network.802_1x.root_cert_url
Description:
Configures the access URL of the CA certificate
Example:
network.802_1x.root_cert_url = http://192.168.1.10/ca.pem
Note: It works only if the value of the parameter ―network.802_1x.mode‖ is set to 2,
3, 4, 5, 6 or 7. The format of the certificate must be *.pem, *.crt, *.cer or *.der.
Web User Interface:
Network->Advanced->802.1x->CA Certificates
Phone User Interface:
None
network.802_1x.client_cert_url
Description:
Configures the access URL of the device certificate.
Example:
network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note: It works only if the value of the parameter ―network.802_1x.mode‖ is set to 2
(EAP-TLS). The format of the certificate must be *.pem.
Web User Interface:
Network->Advanced->802.1x->Device Certificates
Phone User Interface:
None
To configure the 802.1X authentication via web user interface:
1. Click on Network->Advanced.
2. In the 802.1x block, select the desired protocol from the pull-down list of 802.1x
Mode.
a) If you select EAP-MD5:
874
Parameters Permitted Values
URL within 511 characters
.
URL within 511 characters
Default
Blank
Blank