Yealink SIP-T2 SERIES Administrator's Manual page 285

Parameter
None
account.X.auto_dial_num
Description:
Configures the number that the IP phone first dials out when a user lifts the handset,
presses the Speakerphone/off-hook key or desired line key, dials out a call using
account X.
X ranges from 1 to 16 (for SIP VP-T49G/SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Note: It works only if the value of the parameter ―account.X.auto_dial_enable‖ is set
to 1 (Enabled). Line key is not applicable to SIP-T19(P) E2 and CP860 IP phones;
handset and Speakerphone key are not applicable to CP860 IP phones; off-hook key
is only applicable to CP860 IP phones.
Web User Interface:
None
Phone User Interface:
None
Directory provides easy access to frequently used lists. Users can access lists by
pressing the Dir soft key when the IP phone is idle. The lists can be Local Directory,
History, Remote Phone Book and LDAP . The desired lists can be added to Directory using
a directory file (favorite_setting.xml). Directory file is not applicable to SIP VP-T49G IP
phones.
You can ask the distributor or Yealink FAE for directory template. You can also obtain the
directory template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
information on obtaining the directory template, refer to
and Resource Files on page 52.
Configuring Basic Features
Permitted Values
String within 32 characters
Obtaining Configuration Files
Default
Blank
. For more
263