Yealink SIP-T2 SERIES Administrator's Manual page 499

To configure an intercom key via web user interface:
1. Click on DSSKey->Line Key (or Programable Key).
2. In the desired DSS key field, select Intercom from the pull-down list of Type.
3. Enter the remote extension number in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Select the desired line from the pull-down list of Line.
6. Click Confirm to accept the change.
To configure an intercom key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or
4. Select the desired line from the Account ID field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Enter the remote extension number in the Value field.
7. Press the Save soft key to accept the change.
The IP phone can process incoming calls differently depending on settings. There are
four configuration options for incoming intercom calls:
Accept Intercom
Accept Intercom allows the IP phone to answer an incoming intercom call.
Intercom Mute
Intercom Mute allows the IP phone to mute the microphone for incoming intercom calls.
Intercom Tone
Intercom Tone allows the IP phone to play a warning tone before answering an intercom
call.
, or the Switch soft key to select Intercom from the Type field.
Configuring Basic Features
477