Yealink SIP-T2 SERIES Administrator's Manual page 114

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Details of Configuration Parameters:
network.pc_port.enable
Description:
Enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiate
Note: It is not applicable to CP860 IP phones. If you change this parameter, the IP
phone will reboot to make the change take effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Auto Negotiate from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
92
Parameters
9G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2:
http://<phoneIPAddress>/servlet
?p=network-pcport&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet
?m=mod_data&p=network-pcpo
rt&q=load
Permitted Values
0 or 1
Default
1