Yealink SIP-T2 SERIES Administrator's Manual page 171

2. Enter the desired time (in seconds) in the Time-Out For Wi-Fi Status Detection field.
3. Click Confirm to accept the change.
To enable the Wi-Fi feature via phone user interface:
1. Tap ->Basic->Wi-Fi.
2. Tap the On radio box in the Wi-Fi field.
The IP phone scans the available wireless network automatically.
To add a wireless network:
1. Tap ->Basic->Wi-Fi.
2. Tap the On radio box in the Wi-Fi field.
3. Tap Add.
4. Tap the Security Mode field.
5. Tap the desired value in the pop-up dialog box.
- If you select None or WEP:
1) Enter the desired profile name in the Profile Name field.
2) Enter the desired value in the SSID field.
3) Enter the desired password in the WPA Shared Key field.
- If you select WPA-PSK or WPA2-PSK:
1) Enter the desired profile name in the Profile Name field.
2) Enter the desired value in the SSID field.
3) Tap the Cipher Type field.
4) Tap the desired Cipher type (TKIP, AES or TKIP AES) in the pop-up dialog
box.
Configuring Basic Features
149