Parameters
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Note: It works only if the value of the parameter ―account.X.session_timer.enable‖ is
set to 1 (Enabled).
Web User Interface:
Account->Advanced->Session Refresher
Phone User Interface:
None
To configure session timer via web user interface:
1.
Click on Account->Advanced.
2.
Select the desired account from the pull-down list of Account.
3.
Select the desired value from the pull-down list of Session Timer.
4.
Enter the desired time interval in the Session Expires(30~7200s) field.
5.
Select the desired refresher from the pull-down list of Session Refresher.
6.
Click Confirm to accept the change.
Call hold provides a service of placing an active call on hold. When a call is placed on
hold, the IP phones send an INVITE request with HOLD SDP to request remote parties to
Configuring Basic Features
Permitted Values
Default
359