Yealink SIP-T2 SERIES Administrator's Manual page 167

Configuring Basic Features
Parameters Permitted Values Default
(X ranges from 1 to 5) or WPA2-PSK
Description:
Configures the security mode of the wireless network X.
Note: It works only if the value of the parameter ―wifi.enable‖ is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
For SIP VP-T49G:
Network->Wi-Fi->Security Mode
For SIP-T48G:
Network->Wi-Fi->Secure Mode
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Security Mode
wifi.X.cipher_type
NONE, WEP , TKIP , CCMP
NONE
or TKIP CCMP
(X ranges from 1 to 5)
Description:
Configures the encryption type of the wireless network X.
NONE-NONE
WEP-WEP
TKIP-TKIP
CCMP-AES
TKIP CCMP-TKIP AES
Note: It works only if the value of the parameter ―wifi.enable‖ is set to 1 (Enabled)
and ―wifi.X.security_mode‖ is set to WPA-PSK or WPA2-PSK. It is only applicable to
SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Cipher Type
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Cipher Type
wifi.X.password
String within 64
Blank
characters
(X ranges from 1 to 5)
Description:
Configures the password of the wireless network X.
Note: It works only if the value of the parameter ―wifi.enable‖ is set to 1 (Enabled)
and ―wifi.X.security_mode‖ is set to WEP, WPA-PSK or WPA2-PSK. It is only applicable
145