Yealink SIP-T2 SERIES Administrator's Manual page 320

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
5. Click Confirm to accept the change.
To configure call waiting tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Call Waiting Tone.
3. Click Confirm to accept the change.
To configure call waiting and call waiting tone via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press
Waiting field.
3. Press
Tone field.
4. (Optional.) Enter the call waiting on code in the On Code field.
5. (Optional.) Enter the call waiting off code in the Off Code field.
6. Press the Save soft key to accept the change.
Redial tone allows IP phones to continue to play the dial tone after inputting the preset
numbers on the dialing screen.
Procedure
Redial tone can be configured using the configuration files or locally.
Configuration File
Local
298
or , or the Switch soft key to select the desired value from the Call
or , or the Switch soft key to select the desired value from the Play
<y0000000000xx>.cfg
Web User Interface
Configure redial tone feature.
Parameters:
features.redial_tone
Configure redial tone feature.
Navigate to:
For