Yealink SIP-T2 SERIES Administrator's Manual page 186

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Features->General Information->Auto Linekeys
Phone User Interface:
None
To register an account via web user interface:
1. Click Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Line Active field.
4. Enter the desired value in Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively.
5. If you use outbound proxy servers, do the following:
1) Select Enabled from the pull-down list of Enable Outbound Proxy Server.
2) Enter the desired IP address or domain name in the Outbound Proxy Server 1/2
field and the desired port of the outbound proxy server 1/2 in the Port field
respectively.
3) Enter the desired interval in the Proxy Fallback Interval field.
6. Click Confirm to accept the change.
164
Parameters Permitted Values Default