Yealink SIP-T2 SERIES Administrator's Manual page 148

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Details of the Configuration Parameter:
features.power_saving.enable
Description:
Enables or disables the power saving feature.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
Web User Interface:
Settings->Power Saving->Power Saving
Phone User Interface:
None
features.power_saving.office_hour.idle_timeout
Description:
Configures the time (in minutes) to wait in the idle state before IP phone enters
power-saving mode during the office hours.
Note: It is only applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
Web User Interface:
Settings->Power Saving->Office Hour Idle TimeOut
Phone User Interface:
None
features.power_saving.off_hour.idle_timeout
Description:
Configures the time (in minutes) to wait in the idle state before IP phone enters
power-saving mode during the non-office hours.
Note: It is only applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
126
Parameters
rvlet?p=settings-powersavi
ng&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/se
rvlet?m=mod_data&p=setti
ngs-powersaving&q=load
Permitted Values Default
0 or 1
Interger from 1
to 600
Integer from 1 to
10
1
480
10