Yealink SIP-T2 SERIES Administrator's Manual page 789

Details of the Configuration Parameter:
Parameters
phone_setting.ring_type
Description:
Configures a ring tone for the IP phone.
Permitted Values:
Resource:Ring1.wav, Resource:Ring2.wav, Resource:Ring3.wav, Resource:Ring4.wav,
Resource:Ring5.wav, Resource:Ring6.wav, Resource:Ring7.wav, Resource:Ring8.wav,
Resource:Silent.wav, Resource:Splash.wav, Default:default-ring.wav or custom ring
tone name (e.g., Config:Customring.wav).
For SIP VP-T49G:
The default value is Default:default-ring.wav.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2/CP860:
The default value is Resource:Ring1.wav.
Example:
To configure a phone built-in ring tone (e.g., Ring1.wav): phone_setting.ring_type =
Resource:Ring1.wav
To configure a custom ring tone (e.g., Customring.wav): phone_setting.ring_type =
Config:Customring.wav
To configure a phone default ring tone: phone_setting.ring_type =
Default:default-ring.wav
Web User Interface:
Settings->Preference->Ring Type
Phone User Interface:
Settings->Basic->Sound->Ring Tones->Common
account.X.ringtone.ring_type
Phone User Interface
Permitted Values
Refer to the following
content
Refer to the following
content
Configuring Audio Features
For SIP VP-T49G:
http://<phoneIPAddress>/ser
vlet?m=mod_data&p=accou
nt-basic&q=load&acc=0
Configure a ring tone for the
IP phone.
Configure a ring tone for the
account.
Default
Refer to the following
content
Common
767