Yealink SIP-T2 SERIES Administrator's Manual page 829

Parameters
X ranges from 1 to 16 (for SIP VP-T49G/SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
account.1.ptime = 20
Web User Interface:
Account->Advanced->PTime(ms)
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs on a
per-line basis via web user interface:
1. Click on Account->Codec.
2. Select the desired account from the pull-down list of Account.
3. Select the desired codec from the Disable Codecs column and then click
The selected codec appears in the Enable Codecs column.
4. Repeat the step 4 to add more codecs to the Enable Codecs column.
5. To remove the codec from the Enable Codecs column, select the desired codec
and then click
6. To adjust the priority of codecs, select the desired codec and then click
or .
7. Click Confirm to accept the change.
.
Configuring Audio Features
Permitted
Default
Values
.
807