Yealink SIP-T2 SERIES Administrator's Manual page 436

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Details of Configuration Parameters:
features.pickup.group_pickup_enable
Description:
Enables or disables the IP phone to display the GPickup soft key when the IP phone
is on the dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Group Call Pickup
Phone User Interface:
None
account.X.group_pickup_code
Description:
Configures the group pickup code for account X.
X ranges from 1 to 16 (for SIP VP-T49G/SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
account.1.group_pickup_code = *69
Note: The group call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface:
Account->Advanced->Group Call Pickup Code
Phone User Interface:
None
features.pickup.group_pickup_code
Description:
414
Phone User Interface
Parameters
Assign a group call pickup key.
Permitted Values
0 or 1
String within 32 characters
String within 32 characters
Default
0
Blank
Blank