Yealink SIP-T2 SERIES Administrator's Manual page 248

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2. Select the desired value from the pull-down list of Custom Softkey.
3. Select the desired state from the pull-down list of Call States.
4. Select the desired soft key from the Unselected Softkeys column and then
click
The selected soft key appears in the Selected Softkeys column. If more than four
soft keys are selected, a More soft key will appear on the LCD screen, and the
selected soft keys are displayed in two pages.
5. Repeat the step 4 to add more soft keys to the Selected Softkeys column.
6. To remove the soft key from the Selected Softkeys column, select the desired soft
key and then click
7. To adjust the display order of soft keys, select the desired soft key and then click
or .
The LCD screen displays the soft keys in the adjusted order.
8. Click Confirm to accept the change.
The softkey layout template allows you to customize soft key layout for different call
states. The call states include CallFailed, CallIn, Connecting, Dialing (not applicable to
SIP VP-T49G and SIP-T48G IP phones), RingBack and Talking.
You can ask the distributor or Yealink FAE for softkey layout template. You can also
obtain the softkey layout template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
information on obtaining the softkey layout template, refer to
Files and Resource Files
226
.
.
on page 52 .
. For more
Obtaining Configuration