Yealink SIP-T2 SERIES Administrator's Manual page 522

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Description:
Enables or disables the IP phone to answer an incoming call by picking up the
handset, pressing the Speakerphone key or pressing the HEADSET key directly.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), you need to press the corresponding line key, the Answer
soft key or the OK key to answer an incoming call after picking up the handset,
pressing the Speakerphone key or pressing the HEADSET key.
Note: It is not applicable to CP860 IP phones.
Web User Interface:
None
Phone User Interface:
None
The IP phone automatically detects the available bandwidth for call connection by
default. You can specify the uplink and downlink bandwidths for the IP phone to achieve
the best result. Uplink bandwidth is the maximum bandwidth of outgoing calls, and
downlink bandwidth is the maximum bandwidth of incoming calls. It is only applicable
to SIP VP-T49G IP phones.
Procedure
Bandwidth can be configured using the configuration files or locally.
Configuration File
Local
500
Parameter
<y0000000000xx>.cfg
Web User Interface
Permitted Values
Specify the maximum
transmitting or receiving
bandwidth.
Parameter:
features.uplink_bandwidth
features.downlink_bandwidth
Specify the maximum
transmitting or receiving
bandwidth.
Navigate to:
http://<phoneIPAddress>/servlet
?m=mod_data&p=settings-vide
o&q=load
Default