Yealink SIP-T2 SERIES Administrator's Manual page 489

Local
Details of Configuration Parameters:
Parameters
features.dtmf.replace_tran
Description:
Enables or disables the IP phone to send DTMF sequences for transfer function when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will perform the transfer as normal when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key during a call.
If it is set to 1 (Enabled), the IP phone will transmit the designated DTMF digits to the
server for performing call transfer when pressing the Tran/Transfer soft key or
TRAN/TRANSFER key during a call.
Web User Interface:
Features->General Information->DTMF Replace Tran
Phone User Interface:
None
features.dtmf.transfer
Description:
Configures the DTMF digits to be transmitted to perform call transfer.
Valid values are: 0-9, *, # and A-D.
Web User Interface
Configuring Basic Features
Configure transfer via DTMF.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T
29G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2/CP860:
http://<phoneIPAddress>/servl
et?p=features-general&q=loa
d
For SIP VP-T49G:
http://<phoneIPAddress>/servl
et?m=mod_data&p=features-g
eneral&q=load
Permitted Values
0 or 1
String within 32
characters
Default
0
Blank
467