Yealink SIP-T2 SERIES Administrator's Manual page 166

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
wifi.X.label
(X ranges from 1 to 5)
Description:
Configures the profile name of the wireless network X for the IP phone.
Note: It works only if the value of the parameter ―wifi.enable‖ is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Profile Name
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Profile Name
wifi.X.ssid
(X ranges from 1 to 5)
Description:
Configures the Service Set Identifier (SSID) of the wireless network X.
SSID is a unique identifier for accessing wireless access points.
Note: It works only if the value of the parameter ―wifi.enable‖ is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->SSID
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->SSID
wifi.X.priority
(X ranges from 1 to 5)
Description:
Configures the priority for the wireless network X for the IP phone.
5 is the highest priority, 1 is the lowest priority.
Note: It works only if the value of the parameter ―wifi.enable‖ is set to 1 (Enabled). It
is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Web User Interface:
Network->Wi-Fi->Change Priority
Phone User Interface:
None
wifi.X.security_mode
144
Parameters Permitted Values
String within 31
characters
String within 32
characters
Integer from 1 to 5
NONE, WEP, WPA-PSK
Default
Blank
Blank
1
NONE