Yealink SIP-T2 SERIES Administrator's Manual page 726

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Users can check
interface. Users can also specify the
phone user interface. Options of the RTP status to be displayed on the web user
interface cannot be specified.
Procedure
VQ-RTCPXR can be configured using the configuration files or locally.
Configuration
File
704
the voice quality data of the last call via web user interface or phone user
options of the RTP status to be displayed on the
<y0000000000xx>.cfg
Configure the generation of session
packets.
Parameter:
phone_setting.vq_rtcpxr.session_report.e
nable
Configure the generation of interval
packets.
Parameters:
phone_setting.vq_rtcpxr.interval_report.e
nable
phone_setting.vq_rtcpxr_interval_period
Configure the generation of alert packets.
Parameters:
phone_setting.vq_rtcpxr_moslq_threshold
_warning
phone_setting.vq_rtcpxr_moslq_threshold
_critical
phone_setting.vq_rtcpxr_delay_threshold
_warning
phone_setting.vq_rtcpxr_delay_threshold
_critical
Configure the phone to display RTP status
showing the voice quality report of the
last call on the web user interface.
Parameter:
phone_setting.vq_rtcpxr.states_show_on_
web.enable