Yealink SIP-T2 SERIES Administrator's Manual page 101

If DHCP is disabled or IP phones cannot obtain network parameters from the DHCP
server, you need to configure them manually. The following parameters should be
configured for IP phones to establish network connectivity:
IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Procedure
Network parameters can be configured manually using the configuration files or locally.
Configuration File
Local
<MAC>.cfg
Web User Interface
Phone User Interface
Getting Started
Configure network parameters of
the IP phone manually.
Parameters:
network.internet_port.type
network.ip_address_mode
network.internet_port.ip
network.internet_port.mask
network.internet_port.gateway
network.primary_dns
network.secondary_dns
Configure network parameters of
the IP phone manually.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T2
9G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2/CP860:
http://<phoneIPAddress>/servlet
?p=network&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet
?m=mod_data&p=network&q=l
oad
Configure network parameters of
the IP phone manually.
79