Yealink SIP-T2 SERIES Administrator's Manual page 162

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
features.bluetooth_adapter_name
Description:
Configures the Bluetooth device name.
For SIP VP-T49G IP phones:
The default value is SIP VP-T49G.
For SIP-T48G IP phones:
The default value is Yealink-T48G.
For SIP-T46G IP phones:
The default value is Yealink-T46G.
For SIP-T29G IP phones:
The default value is Yealink-T29G.
Note: It works only if the value of the parameter ―features.bluetooth_enable‖ is set to
1 (On). It is only applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP phones.
Web User Interface:
None
Phone User Interface:
Menu->Basic->Bluetooth->Bluetooth (On)->Edit My Device Information->Device
Name
To active the Bluetooth mode via web user interface:
1. Click on Features->Bluetooth.
2. Select the desired value from the pull-down list of Bluetooth Active.
140
Parameter Permitted Values
String within 64
characters
Default
Refer to the
following
content