Yealink SIP-T2 SERIES Administrator's Manual page 408

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2. Select the desired value from the pull-down list of Fwd International.
3. Click Confirm to accept the change.
To configure call forward in phone mode via phone user interface:
1. Press Menu->Features->Call Forward.
2. Press
soft key.
3. Depending on your selection:
a) If you select Always Forward:
1) Press
the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code and off code respectively in
the On Code and Off Code field.
b) If you select Busy Forward:
1) Press
the Busy Forward field.
2) Enter the destination number you want to forward all incoming calls to
when the IP phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code and off code respectively in
the On Code and Off Code field.
c) If you select No Answer Forward:
1) Press
the No Answer Forward field.
2) Enter the destination number you want to forward all unanswered
incoming calls to in the Forward to field.
386
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select the desired value from
or , or the Switch soft key to select the desired value from
or , or the Switch soft key to select the desired value from