Single Block Switch (Single-Block); Optional Stop (Optional Stop) - YASKAWA yasnac i80m Instruction Manual

3.5.1.18
Single block switch (SINGLE-BLOCK)
E
BLOC
OFF
Use this switch
to execute
the
program
stored in
tape
or memory
block by
block. When
a cycle is started
after
turning this switch
on,
the
program
is executed one block
and, when completed,
the machine is
stopped. When
this switch is turned
on
in continuous
operation, the machine is stopped
after the block
under execution
at
that time is completed.
3.5.1.19 Optional stop (OPTIONAL STOP)
E
OPTIONAL
STOP
OFF
This switch
specifies whether
or
not
the M01 command is
to
be executed
in the automatic operation modes (TAPE, MEM,
MDI).
(1)
When the switch is
on,
the machine
stops
after the M01 -containing
block is executed with its
cycle
start
lamp remaining lit (goes
out
if the
FIN signal is
returned, however).
(2)
When the switch is
off, the M01 command is disregarded.
Operation of this switchis invalid for theblock under execution. While
in automatic
operation,
blocks become valid
beginning with newly
read blocks.
r*
-
569
-