Simultaneous One-Axis Control, Manual Pulse Generator - YASKAWA yasnac i80m Instruction Manual

3.5
MACHINE CONTROL STATION (Cont'd)
3.5.1 .5
Simultaneous one-axis control, manual pulse
generator (HANDLE) •*
1
HANDLE
-i-
©
This
pulse
generator
is used
to
move the machine manually.
After selecting
the HANDLE mode,
turn
the handle and the machine moves in the positive
or negative
direction depending on
the direction the handle is turned.
This is simultaneous one-axis operation by
an
axis select switch.
The
following shows how.
to operate
the handle:
(1) Select the HANDLE mode.
(2) Select the axis with the
HANDLE AXIS switch.
(3) Specify the quantity of
movement per
scale
division of the handle with
the MANUAL PULSE
MULTIPLY switch.
(4) Turn the handle clockwise or counterclockwise, and the axis selected
in (2) is moved accordingly.
mi
Clockwise: Moves in the positive direction
Counterclockwise: Moves in the negative direction
Handle axis select switch
(HANDLE AXIS
SELECT) SK
3.5.1 .6
HANDLE
AXIS
4
This switch selects the axis
to
be moved by handle operation.
For details,
see Par. 3.5. 1.5.
-
560
-