YASKAWA yasnac i80m Instruction Manual page 447

(e)
Determine the drawing scale.
Depress the
|
AUTO
j
key
on
the drawing screen.
-ÿMultiplication is automatically calculated and
a message
"AUTO
SCALING" is displayed.
*
:
When automatic scaling is
not
performed, the drawing scale
can
be
set
by inputting the data
to
the drawing condition setting
screen
drawing scale (work coordinate
system)
item.
(f) Execute
drawing.
Depress the START key.
-ÿDrawing starts.
To
stop
drawing, depress the START
\
key again.
To
erase
the drawn diagram, depress the
|
CLEAR key.
With the procedures described above,
drawing is completed.
Additionally, the following functions
are
enabled.
(g)
A drawn diagram
can
be
expanded.
Depress the SCALE key on the drawing screen.
-ÿThe drawing scale changing
screen
is displayed.
By using the cursor key and soft keys, the drawing frame position and
size are changed
and the next drawing scale is
set.
Return
to
the drawing screen and depress the
|
START
|
key.
(h) Draw an arbitrary
process.
Depress the
-ÿThe drawing condition
screen
is displayed.
Move the
cursor
to
the item of "drawing process" and select the tool
No. of the
process to
be drawn by using the soft keys.
Return
to
the drawing screen and depress the
[
START
|
key after
depressing the soft key of the selected drawing.
E
PRM key
on the drawing screen.
(3)
Description of drawing
(a)
Drawing screen
When the
program
path drawing job is selected on the edit
process
screen,
the following drawing screen is displayed. The
drawing screen
is the main
screen
for drawing the
specified
program.
From
this screen,
the
drawing condition setting screen or drawing scale setting
screen
is
called.
- 423 -