4Th-Axis Disregard Input; 5Th-Axis Disregard Input - YASKAWA yasnac i80m Instruction Manual

3.5.1.24 4th-axis disregard input
When the
power is
turned
on
while the 4th-axis
disregard input is
on
(contact
closed), the machine
state
is equivalent
to
one
in which the
4th-axis
is
not
controlled.
fjQIU
However, if the
4th-axis move command
is issued in this
state,
the
position display only
is changed for the 4th-axis
and the axis is
not
actually moved
(machine locked
state).
The position display
of the 4th axis
can be updated in the above
state.
This switch
must
be
operated when the machine is
not operating.
The switch is effective
only
in the block
stop status
or feed hold
status.
3.5.1.25
5th-axis disregard input
When the
power
is
turned
on
while the 5th-axis
disregard input is
on (contact
closed), the machine
state
is equivalent
to
one
in which the 5th-axis is
not
controlled.
I
However,
if the 5th-axis move command is
issued in this
state,
the
position display only
is changed for
the 5th-axis and the axis is
not actually
moved
(machine locked
state).
The position display of the 5th axis
can
be updated in the above
state.
This switch
must
be operated when the machine is
not
operating. The switch is effective
only
in the block
stop status
or
feed hold
status.
-
573
-