Scanning With Airprint - Canon imagerunner advance C5550i User Manual

Scanning with AirPrint

You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with Mac OS X 10.9 or later installed. To scan using TLS, you need a Mac
with Mac OS X 10.11 or later installed.
Network Environment
One of the following environments is required.
● An environment where an Apple device and the machine are connected to the same LAN
● An environment where a Mac is connected to the machine via USB
● For scanning, it is required to set <Use Network Link Scan> to <On>. <TCP/IP Settings>
Link Scan>(P. 745)
● A firmware update may also be required.
● You cannot scan while settings for operations are being made, or while the machine is performing any
operation whatsoever.
Scanning from a Mac
1
Make sure that the machine is turned ON and connected to the Mac.
● For how to make sure of this, see
2
Add the machine to the Mac from [System Preferences]
● If the machine has already been added for printing or sending faxes, this operation is not required.
3
Select this machine from the list of printers in [Printers & Scanners].
4
Click [Scan].
5
Click [Open Scanner].
Linking with Mobile Devices
Updating the Firmware(P. 699)
Setting up the Network Environment(P. 19) .
532
13WK-09W
<Use Network
[Printers & Scanners].