Canon imagerunner advance C5550i User Manual page 67

Enter a user name using alphanumeric characters.
<MIB Access Permission>
Select MIB access privileges from <Read/Write> or <Read Only>.
<Security Settings>
Set a combination of authentication and encoding. Select <Auth. Yes/Encrypt. Yes>, <Auth. Yes/
Encrypt. No>, or <Auth. No/Encrypt. No>.
<Authentication Algorithm>
Select <MD5> or <SHA1> according to your environment.
<Authentication Password>
Enter a password to use for authentication. When the password is entered, <Confirm> is displayed for
confirmation. Enter the password again.
<Encryption Algorithm>
Select <DES> or <AES> according to your environment.
<Encryption Password>
Enter a password to use for encoding. When the password is entered, <Confirm> is displayed for
confirmation. Enter the password again.
6
Press <OK> <OK>.
7
Press <Context Settings>
8
Enter a context name and press <OK>.
9
Press <OK>.
5
Configure settings in <Retrieve Printer Mngt. Information from Host>.
● If you set to <On>, you can periodically acquire printer management information such as printing protocol
from a computer on the network by using SNMP.
6
Press <Next>.
7
Configure settings in <Reject SNMP Packets While in Sleep Mode>.
● SNMP data cannot be received while in sleep mode.
● If you set to <On>, you may not be able to access the machine from Canon Software (iW series) or
applications using the SNMP protocol.
8
Press <OK>.
9
Press
Setting Up
<Register>.
<Apply Set. Changes> <Yes>.
55