Canon imagerunner advance C5550i User Manual page 807

Hide thumbs Also See for imagerunner advance C5550i:
Table of Contents

Advertisement

You can set <Everyday> for the memory reception start time and <Specify Days> for
the memory reception end time (or vice-versa).
<Divided Data RX Timeout>
<Function Settings>
If a received I-fax is divided, the data finished being received is printed when the time specified here passes
after the start of the reception, and the subsequent data is deleted.
If you delete divided data, it cannot be combined to form a complete document, even if the remaining
divided data is received later.
Divided data cannot be printed as a regular image unless it has been combined.
<Forward Temporarily Stored File to Memory RX Inbox>
<Function Settings>
You can set the machine so that unprinted documents due to paper jams or lack of paper can be forwarded to
the Memory RX Inbox of the machine. Forwarded documents can be printed later.
Documents in the Machine (Memory Reception)(P. 354)
<Always Send Notice for RX Errors>
<Function Settings>
You can select whether to notify the sender that an I-fax was not received successfully.
<ECM RX>
<Function Settings>
You can receive faxes using the Error Correction Mode (ECM). ECM checks for fax data errors and corrects them.
To perform a communication using ECM, ECM needs to be set in both the sending machine and this
machine.
Even when you set ECM, errors can sometimes occur due to a poor telephone line connection.
<Fax RX Report>
<Function Settings>
A Fax RX Report is a report that enables you to check whether faxes were received correctly. The machine can
be set to print this report automatically after documents are received or only when a reception error occurs.
Fax RX Report(P. 894)
<Confidential Fax Inbox RX Report>
<Function Settings>
Settings/Registration
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Common Settings>
<Receive/Forward>
<Fax Settings>
<Receive/Forward>
<Fax Settings>
<Receive/Forward>
<Fax Settings>
795
<Set Fax/I-Fax Inbox>
<Set Fax/I-Fax Inbox>
Saving Received

Advertisement

Table of Contents
loading

Table of Contents