Canon imagerunner advance C5550i User Manual page 722

[Destination Server Address:]
Enter the IP address or host name of the server machine. When specifying the port number, "8443" must
be specified. The port number can be omitted. If this is left blank, the server machine is automatically
discovered.
● Example settings (IPv4):
Using an IP address: 192.168.18.138
Using a host name: v4.server.canon.com
● Example settings (IPv6):
Using an IP address: fe80::65f0:82cb:b3d6:e6bc
Using a host name: v6.server.canon.com
When specifying the port number: [fe80::65f0:82cb:b3d6:e6bc]:8443
[Search Depth (Router):]
Enter the number of routers to hop (the number of routers to communicate through). If this value is too
small, the server machine may not be discovered with network discovery. If you do not want to
communicate through routers, specify "1".
[User Account ID for Authentication:]/[New Password:]
Enter the ID and password of a user account with Administrator privileges for the machine to use as the
server machine.
● In the following cases, synchronization can be set without performing step 5.
- When the number of machines to synchronize is 10 or fewer, including the server machine (as long
as the machines are within the same router).
- When <Use User Authentication> is set to <On> on the server machine (see
Authentication>(P. 808) ) and User Authentication is set as the login service (see
Login Services(P. 1083) )
- When nothing is entered in [User Account ID for Authentication:] on the client machines (the item is
null)
- When the service for synchronizing custom settings is started on the server machine (if the machine
is a server/client machine, the setting can be changed by starting the server service and the client
service at the same time)
- When there is only one server machine for synchronizing custom settings on the same network
● If the network settings of the server machine include both IPv4 and IPv6, and if IPv6 is prioritized and
the client machine disables IPv6, the client machine cannot connect via search. Enter the IPv4 address
for the destination server address.
Managing the Machine
710
<Use User
Changing