Canon imagerunner advance C5550i User Manual page 798

<Default Address List When Selecting Line>
<Function Settings>
You can specify the type of address list that you want to display as the default setting when you use <Address
Book> on the Fax Basic Features screen. This setting is only effective when you select the line to use on the
<Select Line> screen. Fax Line Settings(P. 60)
<Select TX Line>
<Function Settings>
You can set the priority of a line to use for sending faxes as well as select a line that is not allowed to use.
● Even if you set <Line 1> to <Prohibit TX>, Line 1 is still used for fax information services.
<TX Start Speed>
<Function Settings>
You can change the send start speed. This setting is useful when there is difficulty initiating the sending of a
document due to a poor line condition.
<R-Key Setting>
<Function Settings>
If your machine is connected through a PBX (Private Branch Exchange), it is necessary to set the access method.
You can set the PBX type to <Prefix> or <Hooking>. If you register the outside line access number in the R-key,
you can easily access the outside line.
<Confirm Entered Fax Number>
<Function Settings>
To prevent sending a fax to an incorrect destination, you can select whether to display an entry confirmation
screen when entering a fax number.
<Allow Fax Driver TX>
<Function Settings>
You can select whether to allow sending a fax from a computer.
<Confirm Before Sending When Fax Dest. Included>
<Function Settings>
You can select whether to display a destination confirmation screen when sending to destinations containing
faxes. This helps prevent you from sending a fax to an incorrect destination.
<Restrict Sequential Broadcast When Fax Dest. Included>
<Function Settings>
You can select whether to restrict sending to multiple destinations containing faxes at the same time.
<Remote Fax Server Address>
<Function Settings>
Settings/Registration
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
<TX> <Fax Settings>
786
<Set Line> <Line X>
<Set Line>
<Remote Fax Settings>