Canon imagerunner advance C5550i User Manual page 141

● Slide the guides until they click into place. If the left guide and front guide are not aligned correctly, the
paper size will not correctly appear on the touch panel display. It is also necessary to adjust the guides
correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.
Size abbreviations on the paper guides
The abbreviations on the paper guides in the paper drawer indicate paper sizes as follows:
● LGL: Legal
● LTR: Letter
● EXEC: Executive
● STMT: Statement
3
Prepare the transparencies.
● Fan the transparency stack well, and align the edges on a flat surface.
● Fan all four sides of the paper stack well.
● Separate each sheet of paper, and make sure that there is enough air between them.
4
Load the transparencies.
● It is recommended that you load transparencies one sheet at a time.
● If you leave transparencies loaded in the paper drawer or multi-purpose tray, the sheets may stick together
and cause a multiple sheet feed or a paper jam. When printing is complete, return the remaining
transparencies to their original package for storage, avoiding locations subject to high temperatures and
humidity.
Basic Operations
129
Make sure that the
paper size setting of
the paper drawer
matches the size of
the transparencies
to load in the paper
drawer.
Load the
transparency stack
with the print side
face up, and against
the side wall of the
paper drawer.