Canon imagerunner advance C5550i User Manual page 942

● Check whether <Use IPv6> is set to <On> in <IPv6 Settings>.
● When using a stateless address or DHCPv6, check whether each address has been retrieved.
● If the address has not been retrieved, check the settings of the router and the DHCPv6 server.
Setting an IPv6 Address(P. 35)
The address of the DNS server is not set correctly.
● Check whether the address of the DNS server is set correctly in <IPv4> or <IPv6>.
Making DNS Settings(P. 42)
Could not send to the TCP/IP protocol stack.
● Check whether the IPv4 address or IPv6 address is set correctly in <IPv4 Settings> or <IPv6 Settings>.
Setting an IPv4 Address(P. 33)
Setting an IPv6 Address(P. 35)
Out of resources. Wait a moment, then try again.
TCP/IP resources were insufficient while continuously sending or after continuously sending with FTP or
Windows (SMB).
● Try again after waiting a while.
Check the TCP/IP.
The TCP/IP of the machine is not operating.
● Check the IP address, DHCP, and Auto IP settings in <TCP/IP Settings>.
Setting an IPv4 Address(P. 33)
XPS Print Range Error
There are no pages that can be processed in the specified range for printing.
● Specify a correct page range.
XPS Image Data Error
Failed to extend the image data.
● Replace the image data in the XPS file and try printing again.
XPS Spool Memory Full
There is insufficient memory to process the XPS data.
● Restart the machine and try printing again. If you still cannot print, divide the pages into multiple files and
print them separately.
XPS Data Error
An invalid command is specified due to corrupt data, etc. and processing cannot continue.
● Perform printing again using XPS data in a format supported by the machine.
XPS Unsupport Image Err
An unsupported data format is included.
Troubleshooting
930