Starting The Remote Ui - Canon imagerunner advance C5550i User Manual

Starting the Remote UI

To start the Remote UI, enter the IP address of the machine in your Web browser. Check the IP address configured for
the machine before performing this operation.
● When both the machine and the Active Directory server are set as user authentication devices (
Configuring the User Login Methods and Authentication Devices(P. 571) ), the time setting of the Active
Directory server needs to match that of the machine.
Using TLS encryption for communication
● When you want to encrypt the Remote UI communication, configure the TLS key and certificate (
Configuring the Key and Certificate for TLS(P. 604) ), go to the <Remote UI> setting (
UI>(P. 814) ) and set <Use TLS> to <On>, then turn the machine OFF and back ON.
1
Start the Web browser.
2
Enter the IP address of the machine, and press the [ENTER] key on the computer
keyboard.
● Enter "http://<IP address of the machine>/" in the address input field.
● When using an IPv6 address, enclose the IP address portion in brackets ([ ])
[fe80:2e9e:fcff:fe4e:dbce]/).
If the Remote UI does not start
● If the login screen is not displayed in step 3 of this procedure, clear the Web browser's cache and enter the
IP address again.
If a message related to security is displayed
● A warning message may be displayed if the Remote UI communication is encrypted. If there are no
problems with the certificate or TLS settings, you can continue using the Web browser.
3
Log in to the Remote UI.
● Enter a registered user name and password in [User Name] and [Password], select the login destination in
[Login Destination:], and click [Log In].
● If [Log In (Guest)] is displayed, unregistered users can click this button and log in as general users.
Managing the Machine
Setting an IP Address(P. 32)
648
13WK-0CY
<Remote
(Example: http://