Canon imagerunner advance C5550i User Manual page 723

6
Click [Change].
7
Restart the machine.
● This operation is not required for a server machine or server/client machine.
● If the machine is a server machine or server/client machine, continue to specify the detailed synchronization
settings. Specifying Detailed Synchronization Settings (Server Machine or Server/Client Machine)
(P. 712)
Checking the Communication Log for Synchronization
● You can check the communication log from the screen for synchronizing custom settings. The log can
also be downloaded as a file.
● "Warning" is recorded as the level when the server machine cannot communicate temporarily.
● "Error" is recorded as the level when the maximum amount of data that can be registered has been
exceeded or authentication with the server machine fails.
Simple Synchronization Settings
● Synchronization of custom settings can be started from the control panel for Canon multifunction
printers within the same router.
- For the server machine:
Press <Management Settings>
(Server)> to <Enable>.
- For a client machine:
Press <Management Settings>
(Client)> to <Enable>.
● If the machine is used as a server/client machine, also set <Synchronize Custom Settings (Client)> to
<Enable>.
● User Authentication must be enabled as the authentication method.
Note When Canceling Synchronization
● When a client machine cancels synchronization of custom settings, the client machine will become
unable to retrieve the settings for each user registered in the server machine. Therefore note that the
personalized data of a machine that was a client machine may not have the latest data after
synchronization of custom settings has been canceled.
Managing the Machine
Turning OFF/Restarting the Machine(P. 657)
<Device Management>
<Device Management>
711
set <Synchronize Custom Settings
set <Synchronize Custom Settings