Quick Adjustment - Canon imagerunner advance C5550i User Manual

5
Place the test page on the platen glass.
● Place the test page with the print side facing down, making sure that the black stripe is facing the left edge of
the machine. However, if you place additional pages, make sure that the black stripe is facing the upper edge
of the machine.
6
Close the feeder and press <Start Scanning>.
● The machine starts scanning the test page.
7
Open the feeder, and remove the test page.
8
Repeat steps 4 to 7.
● To complete the adjustment, print the test page four times, and scan it each time it is printed.

Quick Adjustment

This adjustment maintains the optimized status that was acquired by <Full Adjust>. If the result of this adjustment is
not satisfactory, perform <Full Adjust>.
1
Press <Adjustment/Maintenance>
Gradation>.
2
Select the paper to adjust, and press <Quick Adjust>.
If you selected <Simple> in <Adjustment Level>, it is not necessary to select the paper. Adjustment is
applied to all paper types.
3
Press <Start>.
Changing the Settings for Adjustment
You can change the paper and adjustment level to use when performing adjustment.
Maintenance
<Adjust Image Quality>
872
<Auto Adjust