Registering the LDAP Server
In environments where an LDAP sever is employed, fax numbers and e-mail addresses can be searched, specified as
destinations from the machine, and registered in the machine's Address Book. Up to five LDAP servers can be
registered.
1
Press
.
2
Press <Set Destination>
3
Register the LDAP server.
1
Press <Register>.
2
Enter the necessary information.
<Server Name>
Enter a name for the LDAP server.
<Server Address>
Enter the IP address or host name of the LDAP server using alphanumeric characters
"ldap.example.com").
<Server Address> and DNS
To prevent errors, pay attention to the following when a destination search is carried out from the
machine to the LDAP server.
●
When entering the IP address, check if the usable DNS server supports only forward lookup. When
the DNS server supports forward lookup only, press <Do Not Use> or <Use> in <Authentication
Information> in step 4. When selecting <Use (Security Auth.)>, confirm that the DNS server supports
reverse lookup.
<Position to Start Search>
Specify where to start searching in the directory tree of the LDAP server.
●
For LDAPv3, you can skip the setting because the machine retrieves automatically the server's
setting. For LDAPv2, always specify the point.
Setting Up
<Register LDAP Server>.
49
13WK-012
(Example: