While originals are being scanned
●
Do not add or remove originals.
When scanning is complete
●
Remove the scanned originals from the original output tray to prevent paper jams. If originals are
remained, the original output indicator blinks when you place originals for another job in the feeder.
When scanning long strip originals
●
If you scan long originals (which have a length of up to 630 mm), support the originals by hand when
scanning and outputting paper.
When placing thin paper originals
●
It may be difficult to place thin paper originals. In this case, lightly bend the paper while placing it.
●
Make sure that you do not push too hard when placing the original. The original may not be fed correctly, or
may cause a paper jam.
●
When you place thin A3, B4, A4R, or B5R originals into the feeder, lift up the Original Stopper to prevent
scanned originals from creasing.
Basic Operations
110