Canon imagerunner advance C5550i User Manual page 46

2
Enter the IP address, the subnet mask, and the gateway address.
● Press the button corresponding to each and enter values.
5
Press <OK>.
6
Press
Conducting a Connection Test for an IPv4 Address
When the machine is connected properly, the Remote UI login screen can be displayed from the computer (
the Remote UI(P. 648) ). You can conduct a connection test on the control panel of the machine.
<Preferences>
Enter the address of any other in-use device
➠
When the machine is connected correctly, the <Response from the host.> message is displayed.
● Even though IP addresses are properly set, if the machine is connected to a switching hub, the machine
might not be connected to the network. In this case, delay the timing of the machine's communication start
and try to connect again.
LINKS
Setting an IPv6 Address(P. 35)
Making WINS Settings(P. 47)
Setting Up
<Apply Set. Changes>
<Network>
Setting the Wait Time When Connecting to a Network(P. 41)
<Yes>.
<TCP/IP Settings> <IPv4 Settings>
<Enable>
34
Starting
<PING Command>