Advertisement
Quick Links
Step 1: Unpack the MultiPASS
1. Carefully remove all items from the box.
Remove these items from the documentation package: Quick Start Guide, the Canon Creative for
MultiPASS CD-ROM, Registration card, and Warranty card.
Remove these hardware items from the top tray:
Lift out the MultiPASS unit. Always lift the unit from the bottom.
Important!
Save the box and shipping materials for transporting the MultiPASS in the future.
2. Remove all pieces of shipping tape and protective materials from the unit.
Remove all pieces of shipping tape from the outside of the printer. Be sure to remove the tape
from the back of the printer also.
Remove the protective plastic piece from the sheet feeder and protective foam block from the
paper path.
Note that tape may not be in the exact locations shown here.
Advertisement
Related Manuals for Canon MultiPASS C555
Summary of Contents for Canon MultiPASS C555
- Page 1 Step 1: Unpack the MultiPASS 1. Carefully remove all items from the box. Remove these items from the documentation package: Quick Start Guide, the Canon Creative for MultiPASS CD-ROM, Registration card, and Warranty card. Remove these hardware items from the top tray: Lift out the MultiPASS unit.
- Page 2 3. Open the document tray. Remove the protective sheet covering the operation panel. 4. Open the operation panel. Use both hands to grip the operation panel, and gently pull it toward you until it opens partially. Remove the soft foam sheet from the unit's Automatic Document Feeder (ADF). Press the operation panel closed until it clicks into place.
- Page 3 Step 2: Set Up the MultiPASS 1. Attach the sending document support. 2. Connect the phone line. The MultiPASS unit has three telephone jacks (located on the left side of the unit) that will accept standard line connections. Use the bottom jack to connect the MultiPASS to the wall jack with the supplied line cord (unless connected with Caller ID).
- Page 4 3. Connect your computer to the MultiPASS. USB Cable Users-Do not connect the cable now. Instead, go to Step 5 and follow the instructions for USB connection. Make sure the computer is turned off. Connect a USB or parallel cable to your computer and then to the MultiPASS.
- Page 5 4. Lower the lock lever and press the cartridge button Press the blue lock lever down completely. Press the cartridge button (see step 1 for location) to move the cartridge to its home position on the right and close the ADF. The MultiPASS cleans the print head, which takes about one minute. Step 4: Load a Stack of Paper For printing or receiving faxes, the MultiPASS uses paper from the sheet feeder.
- Page 6 3. Now turn on the computer. When you see the Macintosh desktop, follow these steps. 1. Insert the MultiPASS Canon Creative CD into your CD drive. (This CD contains all the device software for your MultiPASS.) 2. The MultiPASS Canon Creative screen should appear automatically. (If not, double-click the MultiPASS C555 icon that appears in the CD window on your desktop.
- Page 7 When you see the Windows desktop, follow these steps. 1. Insert the Canon Creative CD into your CD drive. (This CD contains all the device software for your MultiPASS, including the MultiPASS Printer and Fax drivers, MultiPASS ODBC and ScanGear™ for MultiPASS.) Setup starts automatically.
- Page 8 4. Follow the instructions on each screen. When you see this screen: Insert the Canon Creative CD into your CD drive and wait for the drive to start up. Make sure CD- ROM drive is checked, and be sure to uncheck the other options. Then click Next.
- Page 9 Double-click the Canon Creative Launcher icon on your desktop. Browse the Canon Creative for MultiPASS CD-ROM from your CD drive. Next, click the "Manuals, Supplies, and Help" button. Then click on the button that corresponds to the manual you want to read.