Canon imagerunner advance C5550i User Manual page 49

5
Press
Conducting a Connection Test for an IPv6 Address
When the machine is connected properly, the Remote UI login screen can be displayed from a computer (
the Remote UI(P. 648) ). If you don't have a computer to check it, confirm if a proper connection is completed with
following the steps.
<Preferences>
Enter the address of any other in-use device or the host name
➠
When the machine is connected correctly, the <Response from the host.> message is displayed.
● Even though IP addresses are properly set, if the machine is connected to a switching hub, the machine
might not be connected to the network. In this case, delay the timing of the machine's communication start
and try to make a connection again.
LINKS
Setting an IPv4 Address(P. 33)
Setting Up
<Apply Set. Changes>
<Network>
Setting the Wait Time When Connecting to a Network(P. 41)
<Yes>.
<TCP/IP Settings> <IPv6 Settings>
37
Starting
<PING Command>
<Enable>