Canon imagerunner advance C5550i User Manual page 580

[Primary Address]
Enter the IP address or host name of the LDAP server
address (127.0.0.1) cannot be used.
[Port:]
Enter the port number used for communicating with the LDAP server. Use the same setting that is
configured on the server. If you do not enter a number, it is automatically set to "636" when the check
box is selected for [Use TLS], or it is set to "389" when the check box is cleared.
[Secondary Address:] / [Port:]
When using a secondary server in your environment, enter the IP address and the port number.
[Comments]
Enter a description or note as necessary.
[Use TLS]
Select the check box when using TLS encryption for communications with the LDAP server.
[Use authentication information]
Clear the check box to allow anonymous access to the LDAP server, only if the LDAP server is set to
allow anonymous access. When using the user name and password for authentication, select the check
box and enter values for [User Name:] and [Password:].
[Starting Point for Search:]
Specify the location (level) to search for user information when LDAP server authentication is
performed.
4
Specify how to set the attribute names and domain name.
[User Name (Keyboard Authentication):]
Specify the LDAP data field (attribute name) for the user name on the LDAP server
[Card ID (IC Card Authentication)] / [Verification Value (IC Card Authentication):] / [PIN (IC Card
Authentication):]
When using IC card authentication, specify the LDAP data fields (attribute names) for the card ID,
validity value (number of reissues), and PIN.
[Login Name:] / [Display Name] / [E-Mail Address]
Managing the Machine
(Example:
568
ldap.example.com). The loopback
(Example: uid).