Specifying MAC Addresses in Firewall Settings
You can set whether to allow or reject communication with a device that has a specific MAC address.
1
Press
.
2
Press <Preferences>
3
Select <Outbound Filter> or <Inbound Filter>.
●
To restrict data sent from the machine to a computer, select <Outbound Filter>.
●
To restrict data received from a computer, select <Inbound Filter>.
4
Set <Use Filter> to <On>, select <Default Policy>, then press <Register>.
●
For <Default Policy>, select <Reject> to only allow communication with devices that have a MAC address
specified in <Exception Addresses> in the next step, or select <Allow> to reject communication with them.
●
If <Reject> is selected for <Default Policy>, the restrictions do not apply to sending to multicast or broadcast
addresses.
5
Enter the exception addresses, and press <OK>.
●
Specify the MAC addresses to designate as exceptions of the <Default Policy> option selected in the previous
step.
To edit an exception address
●
On the screen displayed in step 4, select the exception address that you want to edit, and press <Edit> to
display the edit screen.
6
Press <OK>.
7
Press
Managing the Machine
<Network>
<Apply Set. Changes>
<Firewall Settings>
<Yes>.
600
<MAC Address Filter>.
13WK-0C0