Canon imagerunner advance C5550i User Manual page 68

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

When using SNMPv1 and SNMPv3 in combination, it is recommended to set MIB access privileges for

SNMPv1 to <Read Only>. If you set <Read/Write>, almost all of the machine's operations become practicable

and the strong security functions of SNMPv3 will not be effective. Access privileges to MIB can be set in

either SNMPv1 or SNMPv3. In SNMPv3, you can set them for each user.

If Administrator is disabled, you cannot specify settings in <SNMP Settings>

<Administrator Settings>. In addition, <Use Same Password as for Authentication> for <Encryption

Password> is fixed to off. "Administrator" cannot be used as a user name in <SNMP Settings>

<User Settings>.